Owens Corning Roof Installation Nationwide

Owens Corning Roof Installation in Orlando: What to Know First

Owens Corning roof installation in Orlando typically runs $11,000 to $18,000 for a standard single-family home, depending on the shingle line you choose and the square footage of your roof deck. We install Owens Corning Duration, Duration FLEX, Oakridge, and Berkshire systems as an independent Owens Corning service provider, which means we’re not tied to any manufacturer’s corporate installation arm. You get the same materials, a written price before we start, and a roof that’s installed to Florida wind codes.

Call (448) 218-0800

This page is for Orlando homeowners who’ve already decided on Owens Corning and want to know what a proper install looks like, what it costs, and what can go wrong if corners get cut. If you’re still weighing brands, we also work with GAF and CertainTeed and will tell you honestly when one makes more sense than another. Call (448) 218-0800 to schedule a free estimate.

How Owens Corning Products Fail – and How We Fix Them

Every shingle brand fails differently in Central Florida’s climate. Here’s what we actually see on Owens Corning roofs around Orlando, and what we do about it.

• Duration Series granule loss after wind-driven rain. Duration shingles have a heavier granule coating than Oakridge, but Orlando’s afternoon thunderstorms beat on roof slopes facing west and southwest harder than any other direction. We regularly find granule loss concentrated on those facing slopes within six to eight years, which exposes the asphalt mat and accelerates UV breakdown. Fix: we inspect granule coverage during install, flag slopes that will take the worst weather, and recommend the right Owens Corning line for your home’s orientation rather than defaulting to whatever’s on special.
• Oakridge nail-strip blow-through from high-nailing. Oakridge is the budget-friendly Owens Corning line, and it’s on a lot of Orlando track homes. The common failure is high-nailing: installers drive the nail above the reinforced nail strip, and the shingle eventually tears free in a wind gust. Central Florida gets enough microbursts that high-nailed Oakridge roofs lose shingles long before their rated life. Fix: we hand-nail or use pneumatic guns with depth guides calibrated to the nail strip, every row, and we photograph the nailing pattern before underlayment covers it.
• Duration FLEX sealant issues in high heat. Duration FLEX has a polymer-modified asphalt that handles temperature swings better than standard Duration, but we’ve seen the factory sealant strip fail to activate on installs done in cooler months by crews that didn’t give it time to bond. In Orlando, a December install followed by a February windstorm can lift shingles before the sealant sets. Fix: we adjust installation technique seasonally, including light rolling when temperatures are marginal, and we back every install with our 365-Day Done Right Promise, in writing, included with every job.
• Berkshire ridge cap splitting around roof hips. Berkshire is Owens Corning’s luxury laminate line, and it looks great on larger custom homes in Dr. Phillips and Windermere. The weak point is the ridge cap material, which is thicker than standard cap and more prone to cracking if the installer bends it too aggressively around tighter hip angles. Fix: we pre-form Berkshire ridge caps using a heat gun on cold mornings and cut relief notches on sharp hip transitions, so the cap lays flat without microfractures.
• Flashing transition failures at dead valleys. This one’s not unique to Owens Corning, but Orlando homes with complex roof lines – common in neighborhoods like College Park and Winter Park – have dead valleys where water from two slopes meets and gets channeled down a seam. Most installers lay the shingles into the valley and hope for the best. Fix: we install closed-cut or woven valleys per Owens Corning’s published specs, and we use ice-and-water shield membrane under the valley metal because the afternoon storms that hit this area dump more water in an hour than most cities get in a week.

Our Owens Corning Roof Installation Process

Here’s what an Owens Corning install with Crestview looks like, start to finish, no mystery steps.

1. 1
   Free roof assessment and written estimate. We come out, measure the roof deck, inspect the existing underlayment, and give you a written price with every line item broken out. The number on the page is the number on the invoice.
2. 2
   Material selection and order confirmation. We walk you through your Owens Corning line options: Oakridge for budget, Duration for the best balance of weather resistance and cost, Duration FLEX if your roof has complex geometry, Berkshire if you want the premium look. We order directly from Owens Corning distribution in Orlando, so lead times are short.
3. 3
   Tear-off and deck inspection. We remove the old roof, inspect the plywood or plank decking underneath, and replace any rotted or soft sections. This is where hidden damage shows up, and we photograph everything before new decking goes down.
4. 4
   Underlayment, flashing, and shingle install. Synthetic underlayment goes over the entire deck, new flashing goes around every penetration, and then the Owens Corning shingles go on course by course. We follow the manufacturer’s published installation specs, including nail placement and sealant activation.
5. 5
   Final inspection and photo documentation. We walk the roof, check ridge lines and valleys, and send you before, during, and after photos by text. You see what we did, not a summary paragraph on an invoice.
6. 6
   Warranty registration and guarantee paperwork. We register your Owens Corning manufacturer warranty and give you our written workmanship guarantee, including the 365-Day Done Right Promise, before the crew rolls out.

What Owens Corning Roof Installation Costs in Orlando

Here’s what our clients typically pay for a full Owens Corning roof install in the Orlando area. These are real numbers from our jobs, not manufacturer list prices.

• Oakridge full roof install: $10,500 to $13,500 for a 1,800 to 2,200 square foot home
• Duration full roof install: $12,000 to $15,500 for the same size range
• Duration FLEX full roof install: $13,500 to $17,000
• Berkshire full roof install: $16,000 to $20,000 and up for larger or steeper roofs

What moves the price: roof steepness, number of valleys and hips, decking replacement, and whether your home is in a wind zone requiring upgraded fastening. We don’t change the price once the estimate is signed, and you’ll get a written line-item price before any work starts. Call (448) 218-0800 for an exact quote on your home.

Why Orlando Homeowners Call Crestview Roofing Co Orlando for Owens Corning Work

We’re an independent Owens Corning service provider, which means our loyalty is to you, not to a manufacturer’s installation network. Every Owens Corning install gets the same thing: a written price before we start, a crew you can identify before they arrive, live trackable arrival times, and photo proof of the finished roof. If anything fails within 365 days, we fix it at no charge. That’s the guarantee, in writing, on every single job. No negotiation, no phone tag, no waiting until Monday. A live person answers when you call, 24/7.

Dylan Pace built this company on a simple rule: if it’s not in writing, it’s not a promise – it’s just weather talk. You’ll get every commitment from us in writing, including the 365-Day Done Right Promise. And because we also install GAF and CertainTeed, if Owens Corning isn’t the right fit for your roof, we’ll tell you that too instead of selling you what we have on the truck.

FAQs