Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Gutter Replacement: The Orlando Owner’s Guide
IKO gutter replacement in Orlando typically runs $8 to $14 per linear foot installed for standard 5-inch aluminum K-style gutters, which puts a full single-story home between $1,200 and $2,200 depending on footage. We stock IKO-compatible gutter profiles on our trucks and can usually complete a standard replacement the same day we arrive. Most homeowners discover the failure during one of Orlando’s afternoon downpours, when water sheets over the gutter face instead of flowing to the downspout, leaving a telltale trench in the mulch below the drip line.
If you’re reading this because your IKO gutters are pulling away from the fascia or rusted through at the seams, you’ll get exact pricing and a written quote before we start. Call (448) 218-0800 to schedule a free estimate. We document everything with before-and-after photos so you see exactly what was replaced.
Which IKO Models This Applies To
IKO manufactures gutter systems that pair with their asphalt shingle lines, including the Cambridge, Dynasty, and Nordic series roofs. The gutter profiles themselves fall into two main categories: 5-inch K-style aluminum (the most common in Orlando neighborhoods like College Park and Conway) and 6-inch oversized K-style for steeper roof pitches or homes with heavier tree cover. If you’re not sure which you have, measure the opening across the top of the gutter. Five inches is standard; six inches handles roughly 40% more water volume.
On the OEM versus aftermarket question: IKO-branded gutters are manufactured to their own coil stock spec, but the profile dimensions are compatible with industry-standard aluminum gutter systems from major suppliers. We install manufacturer-backed aluminum that matches the IKO profile exactly, which matters because mismatched profile bends at the miter joints are the first place Florida humidity and rain exposure create pinhole leaks. We’re an independent service provider, not affiliated with IKO, so we’ll give you a straight answer on whether OEM or equivalent aftermarket material makes more sense for your roofline.
Styles & brands we work with






Signs Your IKO Gutter Replacement Is Failing
- Water spilling over the gutter face during rain. This usually means the gutter slope, also called the pitch, has settled over time, or the downspout is clogged with Orlando’s oak pollen and pine needles, forcing water back over the edge.
- Visible rust streaks or pinhole leaks at the seams. Aluminum gutters don’t rust, but the steel screws and hangers do. When the fasteners corrode in Florida’s humidity, the rust bleeds down the gutter face and the seams begin to separate.
- Gutters pulling away from the fascia board. The aluminum hangers, or brackets, that hold the gutter to the house loosen as the wood behind them softens from trapped moisture. A gutter sagging even a half-inch creates a dam that backs water up under the shingle edge.
- Fascia board staining or paint peeling directly below the roofline. That’s a sign water has been getting behind the gutter, not just running through it. In Orlando’s rainy season, this turns into wood rot within a single summer.
- Mulch washed flat or a trench forming in the flower bed below the drip line. When gutters fail, the water lands as a concentrated sheet instead of dispersed through the downspout. The trench is the ground-level evidence that something up top stopped working correctly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Orlando, standard IKO-profile 5-inch aluminum gutter replacement runs $8 to $14 per linear foot installed. A typical 150-linear-foot single-story home lands between $1,200 and $2,100. The range depends on three things: whether the existing fascia board needs repair before we can hang new gutters, whether you’re replacing downspouts at the same time, and whether your home calls for 5-inch or 6-inch profile.
Every quote is a written line-item price before any work starts. You’ll see the parts cost, the labor, and the disposal fee broken out separately. The number on the estimate is the number on the invoice. Every IKO gutter replacement carries our 365-Day Done Right Promise: if the installation fails within a year, we return and correct it at no charge. No negotiation, no runaround.
DIY or Call Us?
Gutter replacement isn’t a high-tension danger like garage door springs, but it’s not a weekend ladder project for most Orlando homeowners either. You can safely check for obvious issues: look for daylight gaps between the gutter and fascia, inspect the miter joints for separation, and watch how water behaves during the next storm. That diagnosis costs you nothing and helps you decide whether you’re looking at a repair or a replacement.
Where DIY goes wrong is the ladder work. Most gutter replacement injuries in Florida happen because of soft ground under the ladder base after rain, or overreaching instead of moving the ladder. You’re working at roofline height with both hands occupied, and Orlando’s afternoon storms don’t wait for you to finish. If you’re comfortable on the ladder and the run is short, a sectional patch is doable. For full IKO gutter replacement, call us at (448) 218-0800 for a free estimate. We’ll send a background-checked, uniformed technician with a live arrival time you can track.
FAQs
Aluminum gutter systems like IKO’s typically last 20 to 25 years in Orlando, but the fasteners and sealant at the joints usually fail at the 10 to 12 year mark. That’s the repair window most homeowners in neighborhoods like Audubon Park and Delaney Park hit before the gutters themselves need full replacement. If you’re seeing rust at the seams or separation at the miters, a full replacement now costs less than repeated patch repairs over the next decade. Call (448) 218-0800 and we’ll assess whether you need repair or replacement.
Yes, in specific cases. A single separated seam, a loose hanger, or a short section of damaged gutter can be repaired without replacing the full run. But if you have three or more failing seams or visible rust at the fasteners throughout, replacement is the honest recommendation. We’ll tell you which one applies to your home before quoting any work.
A standard single-story home in Orlando takes one crew, one day to complete. That includes removing the old gutters, hauling the scrap, repairing any soft fascia board we can address on-site, and installing the new IKO-profile system with downspouts. We’ll give you a written timeline with the quote so you know exactly what day we’re arriving and when we’ll be done.
We stock IKO-compatible 5-inch and 6-inch aluminum gutter profiles on our trucks, along with the matching downspouts, hangers, and miters. We also carry the other major brands we work with, including GAF, Owens Corning, and CertainTeed. For most standard replacements, we don’t need to order anything before starting, which means no second visit and no waiting for material to arrive.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.