Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Atlas Underlayment & Deck Repair: The Orlando Owner’s Guide
If you own an Atlas roof in Orlando and the underlayment or decking underneath it has failed, we stock and install Atlas-compatible underlayment and deck repair materials, with most repairs running between $850 and $2,400 depending on how much decking has to come out. We can usually get a technician to your home within one to two days for an assessment, and we carry Atlas-compatible synthetic underlayment on the truck for most jobs. The way most Orlando homeowners find out is unpleasant: a water stain on the ceiling after one of our afternoon downpours, or a roofer from another company telling them the decking is soft during a shingle quote. By the time you see the stain, water has already worked through the underlayment barrier, which means the material underneath your Atlas shingles isn’t doing its job anymore.
We are an independent roofing contractor in Orlando and are not affiliated with Atlas, but we work with their materials regularly because we stock and install products from Atlas, GAF, Owens Corning, and CertainTeed.
Which Atlas Models This Applies To
Atlas underlayment questions come up most often with the Atlas Pinnacle and Atlas StormMaster shingle lines, which are common in Central Florida subdivisions like Lake Nona, Dr. Phillips, and Winter Park. The underlayment itself is not the shingle you see from the street. It’s the water barrier laid between your roof deck (the plywood or OSB underneath) and the shingles on top. Atlas produces several compatible synthetic underlayment products, including Atlas Summit 60 and Summit 90, and in sheet form, Atlas base and cap sheets for low-slope sections that you might have on a porch or carport. Identifying which one you have matters. Check the edge of the roof where the material peels up near a gutter, or look for a manufacturer stamp left by the original installer. If you can’t identify it, our technicians can match the weight, thickness, and manufacturer spec on site.
One compatibility gotcha we see often in Orlando: a roofer installs a budget #15 felt over Atlas shingles because the crew had it on the truck, and the warranty claim gets denied because Atlas specifies certain underlayment products for their system. Your underlayment choice is part of the Atlas roofing system, not just whatever is cheap and available. That’s why we carry Atlas-compatible synthetic underlayment on our trucks. Aftermarket products do exist, but for an Atlas roof, we recommend matching the manufacturer spec. The material cost difference is usually under $150 on a standard repair, and it keeps your warranty language from becoming a problem.
Styles & brands we work with






Signs Your Atlas Underlayment & Deck Repair Is Failing
- Water stains on ceilings or walls. This is the classic Orlando symptom after a storm rolls through. Water has found a path through the underlayment and is now traveling along the roof deck to a joint or seam, where it drips down into your living space.
- Granules in your gutters or at downspout bases. Atlas shingles shed granules over time, especially after the hail and wind events Central Florida gets each spring. Excessive granule loss exposes the mat underneath and transfers more water pressure onto the underlayment.
- Soft spots on the roof deck when walked on. If you’re up in the attic and the plywood or OSB gives underfoot, the deck itself is water-damaged. Underlayment is not the only problem anymore; you’ll need deck repair too. Do not walk on a roof you suspect is soft.
- Curling or lifting shingle edges near valleys and eaves. When underlayment fails, the shingle edges start to lift because the deck is swelling with moisture below. You’ll see it first on the lower sections of your roof, where water pools during heavy rain.
- Mold or mildew smell in the attic, especially after rain. Moisture trapped between the deck and the underlayment gets hot in the Orlando sun, and that heat accelerates mold growth on the underside of the decking. The smell is musty and persistent.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Underlayment replacement in Orlando runs roughly $850 to $1,600 for a standard section repair, assuming the deck underneath is still sound. If the water has been getting in for a while and the plywood or OSB has rotted, plan for deck repair between $900 and $2,400 total, because rotten sections have to be cut out, replaced, and reattached before new underlayment can go down. The biggest cost driver is the square footage of damaged decking, not the underlayment itself. The second driver is roof pitch: steep roofs take longer and cost more to work on safely.
What you get from us, before any work starts: a written line-item quote. That means the underlayment material, the decking replacement measured in sheets, the labor, the disposal, and the permit if one is required. No vague line called “miscellaneous,” no verbal estimate that shifts after the tear-off. Every repair we perform in Orlando is covered by our 365-Day Done Right Promise: if the repair fails within 365 days, we correct it at no charge. That includes a free second visit, no negotiation. The number on your written estimate is the number on your invoice.
DIY or Call Us?
You can safely check a few things from inside your attic: look for daylight coming through the deck boards, feel for damp insulation, and check for water staining along the rafters. That’s about where DIY should stop. Replacing underlayment means pulling up shingles, and on most Orlando homes, that means working at height with the afternoon heat radiating off the roof surface. Rotten decking is even less forgiving; one wrong step on a soft section and you can go straight through. We’ve repaired enough Orlando roofs to know that a soft deck near a skylight or valley is not something you discover from the top safely.
If you suspect underlayment or deck failure, call us at (448) 218-0800. We won’t talk you into anything. We’ll give you an honest assessment and a written price, and you can decide from there.
FAQs
Atlas synthetic underlayment, when installed correctly, lasts 25 to 30 years in Orlando’s climate, but the real limitation is usually the shingle layer above it and the attic ventilation below it. Poor ventilation traps heat and moisture in the attic, which ages underlayment faster than any storm. Call us at (448) 218-0800 and we’ll tell you honestly whether your underlayment failure is an age problem or a ventilation problem.
Yes, in most cases you can repair the affected section of underlayment without replacing the entire roof, as long as the decking below is still sound and the surrounding shingles are in serviceable condition. We match the Atlas-compatible material type, cut back the damaged section, and re-seal the seams per manufacturer spec. Call us at (448) 218-0800 to schedule an assessment, and we’ll let you know if a section repair is realistic for your roof.
Most section repairs in Orlando take four to eight hours, and we can usually complete the work in a single day. If the deck repair is extensive or the weather doesn’t cooperate, we’ll tell you that on the estimate before we start. The timeline is in writing, same as the price, so there’s no ambiguity.
Yes, we stock Atlas-compatible synthetic underlayment on our trucks for most standard repair jobs in Orlando. For certain specialty Atlas products, like cap sheets for low-slope sections, we can usually source the material from a local supplier within one business day. We’ll confirm material availability when we give you the written estimate.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.