Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Replacement in Orlando: What to Know First
Boral roof replacement in Orlando typically runs $11,500 – $22,000 for a standard single-family home, depending on the profile, roof pitch, and decking condition. As an independent Boral service provider, we replace and repair Boral concrete and composite tile roofs across Orlando, with most full replacements taking five to nine working days once materials land. You’ll get a written line-item price before any work starts, so you know the real number before we ever set foot on the roof. If you own a Boral roof in Orlando and you’re seeing cracked tiles, persistent leaks, or failed underlayment, call (448) 218-0800 and we’ll give you a straight answer and a free estimate.
How Boral Products Fail – and How We Fix Them
Boral makes a serious product, but Orlando’s climate finds every weak point a roof has. Here’s what we see most often on Boral jobs around Orlando, and what we actually do about it:
- Boral Concrete Tile (Classic Slate, Barcelona, and Villa profiles): Concrete tile itself rarely fails from age alone. What fails in Orlando is the underlayment beneath it. After 15 to 20 years of Florida sun and afternoon downpours, the felt underlayment degrades, and the roof starts leaking even though the tiles look fine from the street. We strip the tile, replace the underlayment with a high-temp self-adhered system, and reset the tiles. If tiles are cracked or spalled, we match them from our stock or order direct.
- Nail fatigue on Boral barrel profiles: On Boral Mission and barrel-style tiles, we regularly find tiles that have cracked at the nail line. The cause is almost always the same: installers nailed too tight, and years of thermal expansion in Orlando’s heat cycles did the rest. The fix is lifting the cracked tile, checking the underlayment beneath, and resetting with proper clearance so the tile can flex without fracturing.
- Valley failure on Boral multi-profile roofs: Valleys concentrate more water than any other part of an Orlando roof. We’ve seen Boral roofs where the valley metal was installed wrong years ago and the underlayment under the valley rotted quietly. During replacement, we reflash the valleys with wider metal and a sacrificial membrane under the valley course, so when Orlando’s summer storms dump two inches in an hour, the water goes down the valley and into the gutter, not into the ceiling.
- Hip and ridge cap blow-off: Boral’s ridge caps are heavy, but they aren’t glued to the roof. We see rows of ridge caps lifted by Orlando wind storms because the original mortar or adhesive wasn’t applied correctly. On replacement, we mechanically fasten every cap with stainless hardware and adhesive. The ridge is the first thing a storm tests; we build it to pass.
- Flat roof transitions where Boral tile meets a flat section: A lot of Orlando homes built since 2000 have a tile roof over the main structure and a flat or low-slope section over a lanai or addition. The transition flashing between the tile and the flat roof is a notorious leak point. On Boral replacement jobs, we rebuild that transition with a two-part flashing system and overlap it with the flat roof membrane, so water sheeting off the tile can’t work its way under the edge.
Styles & brands we work with






Our Boral Roof Replacement Process
This isn’t a mystery process where you hand over money and hope. Every Boral roof replacement in Orlando follows the same sequence, and you get photo documentation at each step:
- 1
Roof evaluation and leak diagnosis: We inspect the tile field, flashings, valleys, penetrations, and attic. We document everything in writing with photos before we quote.
- 2
Written itemized estimate: You get a line-item price before any work starts: materials, labor, dump fees, decking repair, permits. The number on the page is the number on the invoice.
- 3
Material decision: We walk you through whether to reuse your existing tile, source new Boral profiles, or switch to a complementary profile from GAF, Owens Corning, or CertainTeed if you want a different look or a lighter option. We’ll give you real tradeoffs, not a sales pitch.
- 4
Tear-off and decking inspection: We remove the old roof and inspect the decking. If decking is rotted or delaminated from Orlando’s humidity, we replace it and document it with photos before covering it back up.
- 5
Underlayment, flashing, and tile installation: We install a high-temp underlayment system, reflash every penetration and valley, and set the tile with proper fastening and clearance. Every step is photographed.
- 6
Final inspection and digital handoff: We walk you through the finished roof with photos, send a digital invoice by text, and register the warranty. The 365-Day Done Right Promise covers the work for a full year in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Replacement Costs in Orlando
Here’s what we tell Orlando homeowners before they commit, because knowing the number matters:
- Full tear-off and new Boral concrete tile, standard single-story: $11,500 – $17,500, including new underlayment, flashings, and ridge work.
- Full replacement, two-story or steep-pitch Orlando home: $16,000 – $22,000. Steep pitches add labor hours and safety equipment, and that’s not a corner you want a roofer to cut.
- Decking replacement: $2 – $4 per square foot of affected decking, priced per sheet with photos so you see exactly what was replaced and why.
- Tile-only repair without full replacement: $450 – $1,200, depending on tile count and whether underlayment repair is needed underneath.
What moves the price most: roof complexity, number of valleys and penetrations, decking condition, and whether your existing tiles are reusable. Call (448) 218-0800 for a free estimate. We’ll give you a written number, not a guess.
Why Orlando Homeowners Call Crestview Roofing Co Orlando for Boral Work
We’re not the biggest roofing company in Orlando, and we’re fine with that. We’re the one that puts everything in writing before the first nail pulls into the driveway. Every Boral roof replacement we do is covered by the 365-Day Done Right Promise, which means if any covered repair fails within a year, we come back and fix it at no charge, no negotiation. A live person answers our phones 24/7, so you’re never leaving a voicemail and hoping. We work with GAF, Owens Corning, and CertainTeed alongside Boral, so the material recommendation you get is the right one for your roof and budget, not the one with the best rebate for the contractor. Dylan Pace runs the work here in Orlando, and he’s the one who writes the estimates. If it’s not in writing, it’s not a promise, it’s just weather talk.
FAQs
Yes. We match Boral profiles like Classic Slate, Barcelona, Villa, and Mission series tiles from our stock or direct from distributors. Color match is close, but if your roof is more than 10 years old, the new tiles will be noticeably brighter until they weather, which is normal for concrete tile. Call (448) 218-0800 and we’ll tell you honestly whether a patch match makes sense or whether a full replacement is the smarter spend.
Boral tile warranties generally cover the tile itself, not the installation or the underlayment. Replacing the roof with proper underlayment and reusing the existing tile doesn’t void the tile warranty, and a bad underlayment replacement job is usually what actually causes problems down the road. We install to Boral’s specs and the Florida building code, and every job is documented with photos so you have a record of exactly what was installed.
Sometimes, yes. If the underlayment is still performing and the problem is limited to cracked tiles, bad flashing, or a single valley, we’ll tell you that and give you a repair price. If the underlayment is failing or the decking is compromised, patching tiles is just chasing leaks. We’ll show you the photos and explain which situation you’re in. Call (448) 218-0800 for a straight read on your roof.
Most full Boral replacements take five to nine working days once materials arrive, weather permitting. Orlando’s afternoon storms can compress the work window in summer, so we schedule around the weather rather than fight it. You’ll get a written timeline before we start, and we send before-and-after photos so you can see the progress from your phone.
Yes. We pull all required permits for roof replacement in Orlando and the work is inspected. Permits protect you, not just the building department. If a roofer says you can skip the permit, that’s a red flag. Get it in writing, get it permitted, get it inspected.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.