Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Atlas Roof Installation in Orlando: What to Know First
Atlas roof installation in Orlando runs $8,500 to $16,400 for a standard single-family home, and we complete most tear-off and re-roof jobs in two to four days. We’re an independent Atlas service provider – not a manufacturer rep, but a crew that installs Atlas shingles from the Pinnacle, StormMaster, and GlassMaster lines every month across Orlando and knows which ones hold up to Florida wind and which ones a homeowner should skip. If you own an Atlas roof that’s failing or you’re considering Atlas for a replacement, you’re in the right place. Call (448) 218-0800 and we’ll give you a written price before anything gets torn off.
Key Takeaways
- We install and repair Atlas Pinnacle, StormMaster, and GlassMaster roofing systems throughout Orlando.
- Most Atlas tear-off and re-roof jobs run $8,500 to $16,400 depending on square footage, deck condition, and underlayment code requirements.
- Written price before work starts, every time – the number on the estimate is the number on your invoice.
- Atlas roofs in Orlando fail most often from lifted shingle tabs and granule loss after our afternoon thunderstorm cycles.
- We’re independent, which means we tell you the truth about Atlas warranty fine print – even when it costs you nothing but saves you a denied claim.
How Atlas Products Fail – and How We Fix Them
Atlas makes a solid shingle, but Orlando’s weather has a way of finding every weak seam. Here’s what we see on Atlas roofs around the city, by line:
- Pinnacle Pristine – lifted shingle tabs after wind-driven rain. Pinnacle’s seal strip is strong out of the package, but if a crew installs in cooler weather or doesn’t get full thermal sealing before the first big storm, the tabs lift. Once water gets under a lifted tab, it tracks to the nail line and starts working the fasteners loose. We fix this by hand-sealing lifted tabs with a polymer-modified adhesive and then inspecting every penetration on that roof plane for water entry.
- StormMaster Shake – granule loss on the east-facing slopes. StormMaster’s heavier rubberized construction handles hail, but the granular surface on Shake-profile shingles sheds faster than the same granules on standard architectural lines. On Orlando homes where the east slope takes direct afternoon sun, we’ll see granule loss concentrated there. The fix is almost never a full tear-off – it’s replacing the most degraded slopes and documenting granule loss for any warranty conversation with Atlas.
- GlassMaster – thermal cracking around fasteners. GlassMaster’s fiberglass mat is lighter than Pinnacle’s, which makes it a decent budget pick, but the mat can crack around nail heads when the deck flexes. Older Orlando homes with 3/8-inch plywood decking and no roof sheathing clips flex just enough to stress the mat. We address this by replacing the cracked shingles and, when the deck is compromised, re-nailing or replacing the sheathing before laying new GlassMaster.
- Chalet – poor water shedding on low-pitch roofs. Atlas’s Chalet line is rated for steeper pitches, but plenty of 1970s Orlando ranch homes were built with 3:12 or 4:12 slopes. When we find Chalet on a roof pitched below its spec, water lingers at the butt joints, and that’s where leaks start. The right fix is a tear-off and a shingle rated for that pitch – often Pinnacle or a comparable CertainTeed option.
- HP42 and Pro-Cut starter strips – blinking skip syndrome. The most common install error we see from previous crews is short-changed starter strips at the eave. If the previous installer didn’t use Atlas’s specified starter shingle or underlayment, the roof can look fine for five years and then fail all at once along the perimeter. We cut back the first two courses, lay the correct HP42 or Pro-Cut starter as Atlas specifies, and re-lay the first courses so water can’t get behind the drip edge.
One thing we tell every Orlando homeowner: most Atlas failures we walk into aren’t the shingle’s fault. They’re install failures – the wrong starter strip, missing underlayment, or fasteners placed outside the nail line. That’s a big reason we’re strict about our own process below.
Styles & brands we work with
Our Atlas Roof Installation Process
- 1
Call and a real person answers. You call (448) 218-0800, a live person picks up, and we schedule a time that works. No voicemail tag.
- 2
Roof assessment and written price. We walk your roof, document what’s there, check the deck, and give you an itemized written price before any work begins. You know exactly what a Pinnacle tear-off costs and what a patch job costs, line by line.
- 3
Install or repair decision. We don’t sell you a roof if you don’t need one. If the deck is solid and the existing Atlas shingles have life left, we’ll say so. If it’s time, we’ll show you why.
- 4
The work itself. We tear off the old material, inspect the deck, replace any bad sheathing, install Atlas underlayment, drip edge, starter strips, and the shingles themselves. Flashing at every chimney, skylight, and vent gets replaced – not just caulked over.
- 5
Before-and-after photos and digital invoice. You get photo documentation of the job, a digital invoice sent by text, and a walkthrough so you can see what we did and why.
- 6
The 365-Day Done Right Promise. Every repair we make on an Atlas roof is covered in writing for a full year. If a repair fails, we come back and fix it at no charge. No negotiating, no runaround.
What Atlas Roof Installation Costs in Orlando
| Atlas Service | Typical Orlando Range |
|---|---|
| Atlas Pinnacle Pristine – standard 1,800 sq ft tear-off and re-roof | $9,200 – $13,800 |
| Atlas StormMaster Shake – same footprint | $11,400 – $16,400 |
| Atlas GlassMaster – budget re-roof, same footprint | $8,500 – $11,000 |
| Isolated Atlas repair (lifted tab, small leak, single slope granule loss) | $300 – $950 |
| Re-decking (per 4×8 sheet, when deck is rotted) | $85 – $120 per sheet |
What moves the price on an Atlas job in Orlando: roof pitch (anything over 6:12 adds labor), deck condition, how many layers of existing roofing need to come off, and whether code requires a full ice-and-water shield perimeter. Most jobs fall within those ranges above. We don’t use change orders to boost a bill after the fact – if the number changes, you’ll know why in writing before we touch anything. Call (448) 218-0800 for an exact line-item quote. The estimate is free.
See the difference
Before
After
Before
After
Before
AfterWhy Orlando Homeowners Call Crestview Roofing Co Orlando for Atlas Work
Dylan Pace built this company on a rule he’s repeated enough that the crew can finish the sentence: “If it’s not in writing, it’s not a promise – it’s just weather talk.” We put everything on paper – the price, the timeline, the guarantee. Our techs show up in uniform with their names on the truck, and you can track our arrival time live so you’re not stuck watching for a truck that may or may not show up. We work with Atlas constantly, but we also install GAF, Owens Corning, and CertainTeed, which means we’re not married to one brand – if an Atlas shingle isn’t right for your Orlando roof, we’ll tell you which one is. And every repair is covered by the 365-Day Done Right Promise, in writing. If it fails within a year, we come back free.
FAQs
Yes, in some cases – if the installation doesn’t follow Atlas’s published specifications. Atlas warranty coverage depends on using their specified underlayment, starter strips, and ridge cap, plus proper nailing pattern. We install Atlas systems the way Atlas specifies so your warranty doesn’t get denied on a technicality.
Pinnacle Pristine holds up best for most Orlando homes because its heavier mat and stronger seal strip resist the lift-and-flap cycle caused by our afternoon thunderstorm wind gusts. StormMaster Shake is also strong, but we reserve it for owners who want the shake look and accept higher granule loss on sun-blasted slopes.
The typical tear-off and Atlas re-roof on a standard single-family home in Orlando takes two to four days, depending on deck condition and roof pitch. We schedule around rain windows as much as anyone can in Florida, but we don’t rush a job to beat a cloud. Call (448) 218-0800 for a timeline tied to your roof’s footprint.
If the leak is isolated to flashing or a handful of shingles on a roof with more than half its life left, repair makes sense. If the underlayment is failed across multiple slopes or the deck is showing rot, replacement is the honest call. We’ll show you photos of the deck and explain what we’d do if it were our house.
No – unless we uncover hidden deck rot that requires new sheathing, and even then, you approve the change in writing before we proceed. The price we give you before work starts is the price you’ll pay. No change orders snuck in at the end.
Get a Written Atlas Roof Installation Price in Orlando
If you need Atlas roof installation in Orlando, start with a call and a conversation. We’ll walk the roof, give you a written price, and tell you honestly whether a repair or full replacement is the right move. No pressure, no vague phone quotes, no surprise at the door. Call (448) 218-0800 to schedule your free estimate.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.