Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Atlas Roof Repair in Orlando: What to Know First
Atlas roof repair in Orlando typically runs $350 – $950 for most shingle and flashing repairs, and we can usually complete the work within 3 to 5 business days once we’ve inspected the damage. That’s the honest range for an independent Atlas service provider doing real repairs, not patches that buy you 6 months. If you own an Atlas roof in Orlando and you’ve spotted a leak, missing shingles, or stains on your ceiling, call us at (448) 218-0800 and we’ll get you a written price before any work starts.
This page is for Orlando homeowners with Atlas roofing, whether it’s a Pinnacle, StormMaster, or GlassMaster line installed 2 years ago or 15 years ago. As an independent Atlas service provider, we repair what Atlas built without pushing you toward a replacement you don’t need. Dylan Pace runs our Orlando crew, and we answer the phone every time.
How Atlas Products Fail – and How We Fix Them
- Pinnacle Pristine shingle seal failure after high wind. In Orlando’s summer storm pattern, we regularly see Pinnacle shingles where the adhesive seal strip has released along the leading edge. The shingle looks fine from the ground, but water drives underneath during a 30-minute afternoon downpour. Our fix is a re-seal using a compatible asphalt adhesive, not a silicone smeared over the problem. Done right, that repair holds for years.
- StormMaster HP shingle uplift at the rake edge. Atlas markets the StormMaster line for impact resistance, but the HP variant’s wider exposure means rake-edge shingles take more wind load. Near College Park and other tree-lined neighborhoods, we see uplift where the last shingle before the gable edge starts flapping. We pull those shingles, reset them with proper nailing pattern, and add a dab of sealant to the nail heads. It’s not a reroof, it’s a 90-minute fix.
- GlassMaster algae staining that hides real granule loss. GlassMaster’s fiberglass mat holds granules differently than older organic shingles. Homeowners see black streaks and assume algae, and sometimes they’re right. But on roofs 10 years or older, that staining often sits near zones where granules are actually separating from the mat. We’ll do a granule-loss test before recommending anything, so you don’t pay for a cosmetic wash when the shingle is actually failing.
- Chimney flashing and Atlas shingles that don’t lie flat at the base. Atlas shingles have a slightly thicker profile than some other brands, particularly the StormMaster line. If the original installer didn’t step-flash the chimney properly, the shingles sit proud against the flashing and create a small dam that pools water. In Orlando’s wet season, that pool is a slow leak in the making. We cut back the shingle, install new step flashing with proper overlap, and re-bed the counter flashing. No more dam, no more leak.
- Vent boot and valley repairs on Atlas roofs with age. Rubber vent boots dry out after 8 to 12 years in Orlando’s heat, and metal valley strips develop pinhole corrosion from pine needle tannins. On Atlas roofs specifically, valley repair is one of the few times we’ll price an OEM part when one is available, because Atlas valley metal has a different profile than generic stock. If OEM is backordered, we’ll tell you that and use quality aftermarket with the same gauge.
Styles & brands we work with






Our Atlas Roof Repair Process
- 1
Call and talk to a person. You call (448) 218-0800. A live person answers, takes your address, and schedules a time. You’ll get a live trackable arrival window, so you’re not sitting around waiting for a van that may or may not show.
- 2
We inspect the roof and name the exact problem. Our technician walks the roof, takes photos, and shows you what’s failing. We’ll tell you whether it’s a flashing issue, a shingle issue, or something else entirely, and we’ll explain it in plain English.
- 3
You get a written price before any work starts. No verbal ballpark, no “we’ll see once we open it up.” The number on the estimate is the number on the invoice, period.
- 4
Parts decision: OEM or quality aftermarket. We’ll tell you if the repair calls for an Atlas-specific part or if a quality aftermarket part does the job. You make the call with full information, not a sales pitch.
- 5
Repair, test, and document. We do the repair, run water where relevant to confirm the leak is stopped, and photograph the finished work before and after. You get a digital invoice sent by text with every line item.
- 6
365-Day Done Right Promise. Every repair is covered in writing for a full year, including a free second visit if the same repair fails. If it’s not in writing, it’s not a promise, it’s just weather talk.
See the difference
Before
After
Before
After
Before
AfterWhat Atlas Roof Repair Costs in Orlando
Here’s what we’re seeing in the Orlando market for Atlas roof repair as of this year:
- Single shingle replacement (Pinnacle or GlassMaster): $180 – $280
- Re-seal a bundle of lifted shingles: $250 – $450
- Vent boot replacement: $200 – $350
- Chimney flashing repair (including new step flashing): $450 – $800
- Valley repair or replacement: $400 – $900, depending on length and whether OEM valley metal is available
- Flat roof patch (if you have a flat section with Atlas underlayment): $350 – $650
What moves the price: how steep the roof is, how many layers are already up there, whether we need OEM Atlas parts, and how much decking or underlayment is involved. None of this changes the fact that you get a written price before work starts. Call (448) 218-0800 and Dylan or one of our techs will give you an exact quote. The estimate is free.
Why Orlando Homeowners Call Crestview Roofing Co Orlando for Atlas Work
Dylan Pace has been running crews in Central Florida long enough to know that Orlando’s afternoon thunderstorms are no joke and that a flashing detail skipped in April shows up as a ceiling stain in August. We built Crestview on one simple rule: every estimate is itemized, every timeline is in writing, and no one gets a surprise bill. Our techs are background-checked and uniformed, so you know exactly who’s arriving before they pull into your driveway. We work with Atlas, GAF, Owens Corning, and CertainTeed, so if your Atlas roof is at the point where repair no longer makes sense, we can talk through what a replacement would cost without pressuring you into one. Every job is governed by The Relay Visibility Guarantee: written price before work, before-and-after photos, live arrival tracking, and a digital invoice sent by text. And every repair is covered by our 365-Day Done Right Promise, in writing, at no extra cost.
FAQs
No. Atlas warranties cover manufacturing defects in the shingles themselves, not the workmanship of the original installer. Hiring an independent Atlas service provider like us for a repair does not void your Atlas warranty, as long as we’re not altering the shingle in a way that changes its performance. We’ll tell you before any work starts if a repair has any chance of affecting a warranty claim, and we’ll put that in writing.
Most Atlas roof repairs are completed within 3 to 5 business days after inspection, depending on the part. If we need an OEM Atlas valley metal or specific StormMaster shingle color, that can add 3 to 7 business days for delivery. Call (448) 218-0800 and tell us what you’re seeing, and we’ll give you a realistic date on the first call.
We keep a small stock of common Atlas colors and lines for repairs, including several Pinnacle and GlassMaster shades. Special orders for StormMaster HP or less common colors take about a week. If we don’t have exactly what your roof needs, we’ll tell you that before scheduling, not after we show up.
When a roof has widespread granule loss, multiple failed valleys, or shingles that are curling and cracking across more than a quarter of the roof surface, replacement usually wins on cost per year. But most Orlando Atlas roofs we see need only a targeted repair. We’ll always give you both numbers, in writing, and let you decide without a sales pitch.
No. The price we put in writing before work starts is the price you pay. If we find something unexpected during the repair that’s outside the original scope, we stop, call you, and send a new written price for your approval before doing anything. No change orders, no surprise add-ons.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.