Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Repair in Orlando: What to Know First
Boral roof repair in Orlando typically runs $350 to $1,100 for most shingle replacements, flashing fixes, and leak repairs, and we can usually have a technician out within a few days of your call. We’re an independent Boral service provider, which means we repair and replace Boral roofing materials without being tied to any manufacturer’s restrictions or inflated OEM-only parts pricing. The honest posture is simple: a written price before any work starts, photo documentation before and after, and a full year of coverage on every repair. If you own a home in Orlando with Boral roofing and you’ve spotted a leak, cracked tile, or lifted shingle, call (448) 218-0800 and tell us what you’re seeing. This page is for Orlando homeowners who want Boral-specific repair answers without the sales pitch.
How Boral Products Fail – and How We Fix Them
- Boral Voyager Redland 45 tile slipping after high winds. Orlando’s summer squalls hit hard from the east, and we regularly find Voyager Redland 45 tiles knocked loose after a storm blows through College Park or Winter Park. The cause is almost always a broken or rusted nail clip, not the tile itself. We reset the tile, replace the clip, and re-seat the water channel so the next gust doesn’t repeat the damage.
- Boral ImpactLoc soffit and fascia edges peeling at the fasteners. In Orlando’s humidity, the aluminum nail flanges on ImpactLoc soffit panels can corrode where the installer over-tightened them. The panel sags, water gets behind it, and you get a drip line on the porch ceiling. We pull the panel, check the underlayment, and refasten with stainless hardware that holds in wet conditions.
- Boral CedarCrest shake shingles cracking along the grain. CedarCrest is a composite shake that looks great on lakefront homes around Orlando, but after five to seven years of Florida sun, the shake butt ends can develop hairline cracks. Water seeps in, the expanded foam core swells, and the shake lifts. We replace the affected shakes individually, match the color line, and seal the edges so the repair blends in.
- Boral flat tile underlayment failing at the valley. On Boral flat tile roofs, the valley metal underneath often fails before the tile does. We see this a lot in Orlando neighborhoods with mature oak canopies, because the leaves hold moisture against the valley and speed up the metal’s corrosion. We lift the tile, replace the valley metal, re-lay the tile, and re-tuck the edge so the water path is clean.
- Boral ColorBlend field tile fading unevenly after a repair. ColorBlend tiles are mixed in batches at the factory, so a repair tile pulled from a different batch can look noticeably off. When we patch a Boral roof in Orlando, we match the tile not just by model line but by production lot where possible. If the exact lot isn’t available, we’ll tell you before we install it, so you’re not surprised by a slight shade difference.
Styles & brands we work with
Our Boral Roof Repair Process
- 1
You call, we answer. A live person picks up at (448) 218-0800, 24/7. You describe what you’re seeing; we ask a few pointed questions about the area and the Boral line.
- 2
We diagnose on-site. Our technician walks the roof, takes photos, and finds the actual failure point. For Boral systems, that means checking the underlayment, the flashing detail, and the fasteners, not just the visible surface.
- 3
You get a written price. Before any tool leaves the truck, you receive a line-item quote on your phone. The number on that page is the number on the invoice. No verbal ranges, no surprises.
- 4
We make the parts decision with you. Boral makes tile, but the underlayment, flashing, and fasteners under it are often third-party. We’ll show you the difference between OEM Boral repair components and quality aftermarket equivalents, and you decide what goes on your roof.
- 5
The repair happens the same visit in most cases. We set the tile or shingle, re-flash the penetration, and test for water tightness before we come down.
- 6
You get photos, an invoice, and a guarantee. Before-and-after photos are texted to you. The invoice arrives digitally. And every repair carries our 365-Day Done Right Promise: if it fails within a year, we’re back at no charge.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Repair Costs in Orlando
| Repair Type | Typical Range |
|---|---|
| Single Boral tile or shake replacement | $350 – $550 |
| Flashing repair around a pipe or vent | $300 – $600 |
| Valley metal replacement (labor + materials) | $700 – $1,200 |
| Small underlayment patch under Boral tile | $450 – $900 |
| Leak investigation (including water test) | $150 – $350 |
The biggest price driver on a Boral roof in Orlando is what’s underneath the tile. If the failure is a cracked tile, it’s a straightforward swap. If the underlayment has rotted from years of trapped moisture, the job gets bigger fast. Tile accessibility matters too: a one-story ranch in Conway is quicker to work than a two-story tile roof in Baldwin Park with steep pitches. Call (448) 218-0800 and we’ll give you a written estimate for your exact roof, not a ballpark for someone else’s.
Why Orlando Homeowners Call Crestview Roofing Co Orlando for Boral Work
Dylan Pace built our process around one rule: if it’s not in writing, it’s not a promise, it’s just weather talk. When you book a Boral repair with us, you know who’s coming, when they’ll arrive, what the job costs, and what you’ll get when we’re done. Our technicians are background-checked and uniformed, and they’ve worked on Boral tile, shake, and soffit systems across Central Florida. We also repair and install GAF, Owens Corning, and CertainTeed products, so if your Boral roof has mixed materials or you’re weighing a brand transition on a future replacement, we can speak to both sides without a bias. Every repair is covered for 365 days, in writing, at no extra cost. That’s The Relay Visibility Guarantee, and it applies to every job we do in Orlando.
FAQs
No, not when the repair follows the manufacturer’s installation guidelines. We use Boral-compatible fasteners and underlayment details that preserve the warranty on the surrounding roof system. As an independent Boral service provider, we’re not bound by the manufacturer’s dealer network rules, but we cut nothing on workmanship that would put your warranty at risk. Call (448) 218-0800 for an exact quote, estimates are free.
Usually yes, but it depends on the ColorBlend lot. Boral mixes color in production batches, and older roofs may have a slightly different shade than what’s available new. We’ll match your tile line first, then your production lot where possible. If the best available tile is a small shade off, we’ll show you photos and let you decide before it’s installed.
For active leaks, we schedule repairs quickly, typically within a few days depending on weather. Orlando’s afternoon thunderstorms don’t wait, and neither do we. If you’ve got water coming through the ceiling, call (448) 218-0800 and tell us the ceiling is wet. We prioritize active water intrusion over cosmetic tile work.
Almost always, if the underlayment is still solid. A few cracked tiles or a failed flashing detail is a $350 to $1,100 repair. A full Boral tile roof replacement is a five-figure job. The tipping point comes when the underlayment has failed over a large area or the tile is so brittle it can’t be worked without breaking. We’ll show you photos of the underlayment so you can see the condition for yourself before you decide.
Yes. Every Boral roof repair we do in Orlando is covered by our 365-Day Done Right Promise. If the repair fails within a year, we correct it at no charge, including a free second visit. The guarantee is in writing on every job, not spoken and forgotten.
Written by Dylan Pace, Owner, Crestview Roofing Co Orlando at Crestview Roofing Co Orlando, serving Orlando and nearby areas.