A Crestview company - serving Orlando, FL

IKO Gutter Replacement Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

IKO Gutter Replacement: The Orlando Owner’s Guide

IKO gutter replacement in Orlando typically runs $8 to $14 per linear foot installed for standard 5-inch aluminum K-style gutters, which puts a full single-story home between $1,200 and $2,200 depending on footage. We stock IKO-compatible gutter profiles on our trucks and can usually complete a standard replacement the same day we arrive. Most homeowners discover the failure during one of Orlando’s afternoon downpours, when water sheets over the gutter face instead of flowing to the downspout, leaving a telltale trench in the mulch below the drip line.

Call (448) 218-0800

If you’re reading this because your IKO gutters are pulling away from the fascia or rusted through at the seams, you’ll get exact pricing and a written quote before we start. Call (448) 218-0800 to schedule a free estimate. We document everything with before-and-after photos so you see exactly what was replaced.

Which IKO Models This Applies To

IKO manufactures gutter systems that pair with their asphalt shingle lines, including the Cambridge, Dynasty, and Nordic series roofs. The gutter profiles themselves fall into two main categories: 5-inch K-style aluminum (the most common in Orlando neighborhoods like College Park and Conway) and 6-inch oversized K-style for steeper roof pitches or homes with heavier tree cover. If you’re not sure which you have, measure the opening across the top of the gutter. Five inches is standard; six inches handles roughly 40% more water volume.

On the OEM versus aftermarket question: IKO-branded gutters are manufactured to their own coil stock spec, but the profile dimensions are compatible with industry-standard aluminum gutter systems from major suppliers. We install manufacturer-backed aluminum that matches the IKO profile exactly, which matters because mismatched profile bends at the miter joints are the first place Florida humidity and rain exposure create pinhole leaks. We’re an independent service provider, not affiliated with IKO, so we’ll give you a straight answer on whether OEM or equivalent aftermarket material makes more sense for your roofline.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your IKO Gutter Replacement Is Failing

  • Water spilling over the gutter face during rain. This usually means the gutter slope, also called the pitch, has settled over time, or the downspout is clogged with Orlando’s oak pollen and pine needles, forcing water back over the edge.
  • Visible rust streaks or pinhole leaks at the seams. Aluminum gutters don’t rust, but the steel screws and hangers do. When the fasteners corrode in Florida’s humidity, the rust bleeds down the gutter face and the seams begin to separate.
  • Gutters pulling away from the fascia board. The aluminum hangers, or brackets, that hold the gutter to the house loosen as the wood behind them softens from trapped moisture. A gutter sagging even a half-inch creates a dam that backs water up under the shingle edge.
  • Fascia board staining or paint peeling directly below the roofline. That’s a sign water has been getting behind the gutter, not just running through it. In Orlando’s rainy season, this turns into wood rot within a single summer.
  • Mulch washed flat or a trench forming in the flower bed below the drip line. When gutters fail, the water lands as a concentrated sheet instead of dispersed through the downspout. The trench is the ground-level evidence that something up top stopped working correctly.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Orlando, standard IKO-profile 5-inch aluminum gutter replacement runs $8 to $14 per linear foot installed. A typical 150-linear-foot single-story home lands between $1,200 and $2,100. The range depends on three things: whether the existing fascia board needs repair before we can hang new gutters, whether you’re replacing downspouts at the same time, and whether your home calls for 5-inch or 6-inch profile.

Every quote is a written line-item price before any work starts. You’ll see the parts cost, the labor, and the disposal fee broken out separately. The number on the estimate is the number on the invoice. Every IKO gutter replacement carries our 365-Day Done Right Promise: if the installation fails within a year, we return and correct it at no charge. No negotiation, no runaround.

DIY or Call Us?

Gutter replacement isn’t a high-tension danger like garage door springs, but it’s not a weekend ladder project for most Orlando homeowners either. You can safely check for obvious issues: look for daylight gaps between the gutter and fascia, inspect the miter joints for separation, and watch how water behaves during the next storm. That diagnosis costs you nothing and helps you decide whether you’re looking at a repair or a replacement.

Where DIY goes wrong is the ladder work. Most gutter replacement injuries in Florida happen because of soft ground under the ladder base after rain, or overreaching instead of moving the ladder. You’re working at roofline height with both hands occupied, and Orlando’s afternoon storms don’t wait for you to finish. If you’re comfortable on the ladder and the run is short, a sectional patch is doable. For full IKO gutter replacement, call us at (448) 218-0800 for a free estimate. We’ll send a background-checked, uniformed technician with a live arrival time you can track.

FAQs

Need Roofing help in Orlando? Licensed & insured · Written quotes before work starts response · free estimates
Call (448) 218-0800
Local Service Coverage

Request a Free Estimate in Orlando

Tell us what you need - Crestview Roofing Co Orlando responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and consent to being contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch